Search Results for:
Do It Yourself Install iPod – iPhone to the Car Stereo
If you want to integrate an iPod or an iPhone with your car stereo, you might need an adapter to do that. And here is an article contain GROM iPod adapter installation instructions if you want to do-it-yourself connecting your iPod with the car stereo buttons or steering wheel controls. The GROM iPod adapter package contain the interface of the device, docking cable, and vehicle specific cable. You will be guided on how-to proper mount your iPod… 4, 111.6, 2, 16, ipod: 12 adapter: 7 install: 3
DIY Connecting Mitsubishi Eclipse Tach Adapter
If you want to do-it-yourself connecting tachometer adapter to your Mitsubishi Eclipse, it is recommended to clearly identify the Coil Positive (12V) supply. The following figure show you the wiring schematic of your car’s ignition system for identifying supply wiring purposes. Once the wire has been located it is recommended to check for 12 volts using a volt meter. Connect the meter and turn the ignition On. See complete installation gu… 2, 79.71, 2, 6, eclipse: 5 adapter: 5
Do It Yourself Ripping DVD onto iTunes for iPod/iPhone
If you may want to watch DVD movies on your iPod/iPhone, the following document provides step by step guide that details how to rip DVD movies to iTunes video files to be ready for iPod/iPhone. First, you need a DVD ripping program (encoder) to remove copy protection and then turn it to iTunes compatible video. What you will be described in this document are sections such as how to import DVD movie, how to trim the video, choosing the output vi… 0, 51.85, 1, 6, ipod: 7
How-to Guide: Connecting Tach Adapter to Dodge Hemi
This article outlines a guideline for connecting a tach adapter to a Dodge Hemi with coil per cylinder ignition. The picture shows you the close-up view of wiring connection after installation. Inspect the wiring and the wire colors at each of the coil packs. The same wire at every coil is the power supply of the coil. You will need to cut the power wire in half at each coil on one bank of coils and choose whether to use the left or the rig… 2, 42.58, 1, 5, adapter: 8
How-to: Adapter Wiring Harness of the Ford TFI Coil
The herein picture diagrams the Ford TFI Adapter Harness facilitates installation of Crane HI-6 ignition system in Ford cars with TFI-IV ignition. And the installation of the adapter harness performed as followed: 1. Locate the TFI coil and unplug the harness from the coil 2. Install adapter plug into the coil (with black and orange wires) 3. Connect the plug with red and white wires to the Ford wire harness plug that was originally connected… 1, 41.81, 1, 6, adapter: 7 install: 1